筋土界面特性宏细观分析试验仪器研制与应用     

易富  杜常博  王政宇  于犇 《煤田地质与勘探》2020,48(1):174-182

为了更全面地分析筋土界面相互作用特性，改制了一台可视加筋土界面特性宏细观分析的试验仪器，可开展不同土工合成材料与填料的直剪和拉拔试验；该仪器改进了试验箱的尺寸，可方便两种试验的对比分析，增加了图像摄录系统，可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验，试验结果表明:两种试验条件下，土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大；直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响，拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著，对似摩擦角的影响较小。随着宏观变量法向应力的增加，细观参数孔隙率减小，平均接触数增加，反映在宏观上的现象就是填料颗粒被压密，筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性，获得关键技术指标以用于加筋结构的设计。   相似文献   

Drying increases organic colloidal mobilization in the karst vadose zone: Evidence from a 15-year cave-monitoring study     

Jin Liao  Chaoyong Hu  Xiuli Li  Jiaoyang Ruan 《水文研究》2021,35(4):e14163

Understanding the hydrological processes of colloids within the karst vadose zone is vital to the security of karst groundwater and providing appropriate paleohydrological explanations of colloid-facilitated metals in speleothem. This study addresses the mobilization mechanisms driving colloidal organic matter (COM) transport in the karst vadose zone using a 15-year long monthly monitoring dataset from a cave drip point (HS4) in Heshang Cave, Qingjiang Valley, China. Variations in COM concentrations were reported as the fluorescence difference values of raw and filtered (<0.22 μm) samples at an excitation wavelength of 320 nm and emission wavelength of ~400 nm. A fluorescence humification index (HIX) lower than 0.8 and an autochthonous index (BIX) higher than 1.2 indicated that the origin of COM was mainly from the karst vadose zone, rather than the soil zone. The COM concentration varied from 0.001 to 0.038 Raman Unit (RU), with evident seasonal fluctuations. Rising limbs for COM values occurred prior to rising limbs within a dripwater hydrograph; moreover, the COM peak values corresponding to the beginning of the increasing hydrograph generally suggested that the mobilization of COM reflected the movement of the air–water interface (AWI) in the karst vadose zone rather than rainfall intensity or flow velocity. COM peak values were positively correlated with the antecedent drying duration and negatively correlated with HIX values. These phenomena may be explained by the increased amount of organic matter that was aggregated and absorbed on the surface of carbonate in the karst vadose zone during a longer drying duration. Moreover, the longer drying duration was also beneficial to autochthonous biological activity, which subsequently decreased the HIX value of the organic matter in the karst vadose zone. The movement of AWI and the drying duration are both controlled by the outside weather conditions. This study is therefore conducive to evaluating the security of karst groundwater in response to climate change, and challenges prevailing paleoclimate interpretations of colloid-facilitated metal abundance timeseries reported from speleothems.  相似文献   

袋装石土工袋剪切力学特性试验研究     

樊科伟  刘斯宏  廖洁  方斌昕  王建磊 《岩土力学》2020,41(2):477-484

袋装石土工袋堆叠过程中在土工袋接触面形成的咬合和嵌固作用，对土工袋剪切力学强度和破坏形式有较大的影响。通过一系列直剪试验研究了咬合和嵌固作用的影响，试验结果表明：袋装石土工袋层间咬合和嵌固作用能够增大土工袋抗剪强度；咬合作用随着土工袋上部竖向应力的增大有所减小，而嵌固作用则有所增大；袋装石土工袋在剪切过程中会产生两种破坏形式，分别为土工袋袋体自身变形和层间滑动破坏；土工袋组合体在受到水平剪切力时会发生整体变形，随后在组合体内部产生阶梯型滑动面，滑裂面的形状随着竖向荷载的增大而有所不同，相应的抗剪强度也会随着滑动面的改变而变化。  相似文献   

Enhancement of backtracking search algorithm for identifying soil parameters     

Yin-Fu Jin  Zhen-Yu Yin 《国际地质力学数值与分析法杂志》2020,44(9):1239-1261

In this paper, an enhanced backtracking search algorithm (so-called MBSA-LS) for parameter identification is proposed with two modifications: (a) modifying the mutation of original backtracking search algorithm (BSA) considering the contribution of current best individual for accelerating convergence speed and (b) novelly incorporating an efficient differential evolution (DE) as local search for improving the quality of population. The proposed MBSA-LS is first validated with better performance than the original BSA and some other typical state-of-the-art optimization algorithms on a benchmark of soil parameter identification in terms of effectiveness, efficiency, and robustness. Then, the efficiency of the MBSA-LS is further illustrated by two representative cases: identifying soil parameters from both laboratory tests and field measurements. All comparisons demonstrate that the proposed MBSA-LS algorithm can give accurate results in a short time. Finally, to conveniently solve the problems of parameter identification, a practical tool ErosOpt for parameter identification is developed by integrating the proposed MBSA-LS and some other efficient algorithms for readers to conduct the parameter identification using optimisation algorithms.  相似文献   

基于航空重、磁数据的南黄海海相地层分布特征识别     

佟晶  张婉  张玄杰  熊盛青 《中国地质调查》2020,7(5):95-106

基于南黄海海域实测高精度航空重、磁数据,结合航空重、磁场及物性特征,通过平均对数功率谱分析匹配滤波方法技术,对南黄海海相地层界面起伏引起的重、磁异常特征进行分离、提取,采用切线法和外奎尔法计算海相地层界面的深度,经地质和地球物理综合解释,编制了南黄海海相地层底界面、顶界面深度图及海相地层厚度图。在此基础上,初步划分了南黄海海相地层构造单元,探讨了南黄海海相地层的分布特征。苏北—南黄海坳陷区的中部坳陷和南部坳陷均发育在强磁性基底之上,构造变形较弱,海相地层保存完整,埋藏浅,厚度为4~8 km,是南黄海地区具有较大资源潜力的油气勘探区。  相似文献   

Coupled groundwater flow and heat transport simulation for estimating transient aquifer–stream exchange at the lowland River Spree (Germany)          下载免费PDF全文

Gunnar Nützmann  Christian Levers  Jörg Lewandowski 《水文研究》2014,28(13):4078-4090

Subsurface flow and heat transport near Freienbrink, NE Germany, was simulated in order to study groundwater–surface water exchange between a floodplains aquifer and a section of the lowland River Spree and an adjacent oxbow. Groundwater exfiltration was the dominant process, and only fast surface water level rises resulted in temporary infiltration into the aquifer. The main groundwater flow paths are identified based on a 3D groundwater flow model. To estimate mass fluxes across the aquifer–surface water interfaces, a 2D flow and heat transport modelling approach along a transect of 12 piezometers was performed. Results of steady‐state and transient water level simulations show an overall high accuracy with a Spearman coefficient ρ = 0.9996 and root mean square error (RMSE) = 0.008 m. Based on small groundwater flow velocities of about 10^?7 to 10^?6 ms^?1, mean groundwater exfiltration rates of 233 l m^?2 d^?1 are calculated. Short periods of surface water infiltration into the aquifer do not exceed 10 days, and the infiltration rates are in the same range. The heat transport was modelled with slightly less accuracy (ρ = 0.8359 and RMSE = 0.34 °C). In contrast to the predominant groundwater exfiltration, surface water temperatures determine the calculated temperatures in the upper aquifer below both surface water bodies down to 10 m during the whole simulation period. These findings emphasize prevailing of heat conduction over advection in the upper aquifer zones, which seems to be typical for lowland streams with sandy aquifer materials and low hydraulic gradients. Moreover, this study shows the potential of coupled numerical flow and heat transport modelling to understand groundwater–surface water exchange processes in detail. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

基于机器学习的重庆长江航道雾图像特征识别研究     

王远谋  李家启  陈施吉  唐家萍  夏佰成  韩世刚 《气象与环境学报》2021,37(1):106-112

基于重庆市境内长江航道雷达站拍摄的雾天气过程影像资料,利用K最近邻、支持向量机、BP神经网络、随机森林等机器学习算法,对无雾和5类有雾天气个例进行图像识别训练,构建雾图像识别模型,并检验了识别准确率。结果表明：机器学习能够有效识别雾图像,随机森林算法的识别效果优于其余3种算法。对于能见度超过1500 m的无雾天气,模型的识别准确率为100%,对于能见度在1000—1500 m范围内的轻雾、能见度低于50 m的强浓雾,模型的识别准确率在90%以上,对于能见度在50—1000 m范围内的雾、大雾和浓雾,识别准确率超过70%。  相似文献   

银额盆地哈日凹陷Y井天然气产层时代厘定及其意义   总被引：4，自引：4，他引：0  

卢进才  宋博  牛亚卓  魏仙样  魏建设  许海红 《地质通报》2018,37(1):93-99

银额盆地哈日凹陷Y井钻遇多层天然气显示层,并对井深2946.0~2951.0m井段射孔压裂,获天然气9.15×104m3/d(无阻流量)。对浅层天然气显示层确定为白垩系银根组无异议,但获得工业气流的产层时代归属尚存争议。通过镜质体反射率(Ro)随深度的变化规律的研究,以及利用钻井岩心实验分析获得泥岩地球化学特征对沉积物源区沉积环境的判别,约束了二叠系与白垩系巴音戈壁组的不整合界面位于第9次取心(岩心底深2593.80m)与第10次取心(岩心顶深2909.60m)之间;地球物理测井自然伽马、电阻率等曲线在2792.0m出现突变,确定二叠系与白垩系巴音戈壁组的不整合界面为2792.0m。明确了Y井天然气产层为二叠系,指示了二叠系良好的油气资源前景,区内今后油气勘探应以二叠系为主要目的层。  相似文献   

刚性挡墙后非饱和土破坏模式及主动土压力计算     

邓波  杨明辉  王东星  樊军伟 《岩土力学》2022,43(9):2371-2382

目前主动土压力计算方法多仅针对土体处于饱和或干燥状态,忽略了其从非饱和到局部饱和,或饱和到非饱和的渐变过程,进而导致计算结果失真。鉴于此,首先开展了一系列刚性挡墙非饱和砂土主动土压力模型试验,揭示了墙后土体的破坏规律：（1）墙后土体顶部出现了近似竖直裂缝,且其发展深度随墙面粗糙度和含水率的增加而变大;（2）墙土界面摩擦对塑性区形状影响较小,且在挡墙移动过程中,墙后土体塑性区形状始终近似保持为平面。在试验基础上,引入广义有效应力原理,基于极限平衡分析建立了考虑吸应力效应的非饱和土主动土压力计算方法,理论与试验实测值表明,所提方法相比其他方法,更接近于试验值。分析了各主要因素对非饱和土压力分布规律的影响,结果表明：主动土压力随有效内摩擦角值增加而减少,而界面摩擦角对其分布影响较小;相比于无吸力情况,考虑吸力时主动土压力更小;随着进气值增加,吸应力对主动土压力的贡献减少,最终趋于恒定。  相似文献   

应力幅值比对土-结构接触面非共轴特性影响研究     

冯大阔  张建民 《岩土力学》2022,43(11):3047-3058

运用80 t大型三维多功能土工试验机（3DMAS）,进行了不同应力幅值比下粗粒土与结构接触面大型三维循环直剪试验,深入分析了应力控制往返椭圆剪切路径下接触面切向位移、非共轴角和剪切柔度等三维力学特性以及应力幅值比的影响规律。应力控制往返椭圆剪切路径下,接触面产生了明显的x向和y向位移、非共轴角和剪切柔度。x向和y向位移幅值、剪切柔度峰值均随循环剪切的进行逐渐减小而后趋于稳定,表现出演化特性。非共轴角受切向应力幅值及切向应力增量方向共同影响,其最值、稳定值随循环周次基本保持不变;正向剪切时非共轴角最大值（最小值）与反向剪切时最小值（最大值）基本出现在同一位置。接触面剪切柔度与非共轴角随旋转角度的变化趋势相反,剪切柔度的增加会抑制非共轴角的发展,反之亦然,两者对立统一。应力幅值比对接触面切向位移间椭圆关系及其时程变化形式、切向应力位移类椭圆关系等影响较小,主要影响切向位移幅值及其偏移程度、切向位移间椭圆关系的长短轴大小及方向、切向应力位移类椭圆关系的长短轴大小、非共轴角的数值及其随旋转角度的变化形式和最值出现位置、剪切柔度随旋转角度的变化形式和峰值及其产生位置等。应力幅值比越大,切向位移幅值越大、向负向偏移越大,剪切柔度峰值越大,随循环剪切的进行减小的速率越慢。应力幅值比ξ_τ=1和ξ_τ≠1时接触面非共轴角和剪切柔度随旋转角度的发展变化形式差别很大。  相似文献